Sign Up For Exclusive MSHA Resources and Updates

MSHA Lock Out Tag Out Enforcement To Increase

MSHA Lock Out Tag Out

MSHA Lock Out Tag Out Enforcement Update

More information has come out since last week’s MSHA Lock Out Tag Out emphasis announcement.

MSHA inspectors will focus heavily on locking out energy sources before performing any maintenance or repairs. In particular, MSHA singled out 1 mechanical lock out standard and three electrical lock out standards that will be emphasized:

Mechanical Lock Out

  • 30 CFR §56/57.14105 – Procedures during repairs or maintenance

Electrical Lock Out

  • 30 CFR §56/57.12006 – Distribution boxes
  • 30 CFR §56/57.12016 – Work on electrically powered equipment
  • 30 CFR §56/57.12017 – Work on power circuits

MSHA Lock Out Tag Out Inspections

There is only one way MSHA inspectors can check if a company is using proper lock out tag out procedures. When the MSHA inspector shows up (unannounced as always) he will go directly to the motor control center. If any maintenance is in progress he’ll be checking for:

Isolating and locking out all energy sources seems to be the largest point of emphasis. In addition to what you’re working on, you must lock out any parts or machines or material that could potentially injure. For example, if you’re working on a cone crusher you must lock out the crusher itself. But you also need to lock out the belts going to and from the crusher. There’s a very good example of this in MSC’s Rules To Live By section which is available in our free trial.

 

MSHA Lock Out Tag Out Try Out Talk

Lock Out, Tag Out, Try Out – Every Time

In a great post, ISHN magazine outlined the most common problems with Lock Out Tag Out. Even after 16 years it’s spot on. I would only add one point. While “trying out” isn’t required by law, it is a best practice. You can’t truly know something is locked out until you’ve tried to turn it on and nothing happens. As MSHA pointed out in their announcement, “it’s not locked out until you’ve tried it out.”

Why do we try out? Our expert Kim Redding was recently consulting at a Cement plant where they needed to replace a belt. Every energy source to the conveyor was identified and locked out; not an easy task when there are over 5,000 breakers in one breaker box. The employees followed every regulation and protocol to the letter. But what happened when they tested their lock out? The belt turned on. Someone had mislabeled breaker, a mistake that seems small until someone’s life is on the line. We all know what could have happened if those workers hadn’t tested their lock out.

Including where you’re working, either the location or equipment, on tags is another best practice. You’re not required by law to include this information, but it’s a very good idea. It only takes a few extra seconds and could prevent a serious accident.

MSHA lock out tag out enforcement will increase in the coming months. Are you ready? To prepare, you can take our free Lock Out Tag Out module.

Lock out tag out online MSHA training

Lock Out Tag Out Will Be Scrutinized By MSHA

lock out tag out

Lock Out Tag Out Procedures Will See Heightened Emphasis from MSHA in 2016

Lock Out Tag Out procedures have been an essential part of mine safety for years. This morning, Neal Merrifield of MSHA took the opportunity to reiterate “how important it is to develop and implement an effective mine-specific Lock – Tag – Try program.”

He goes on to say, “since 2005, 28 metal and nonmetal miners have died in accidents in which electrical power was not disconnected and locked out or other energy sources were not controlled before work was begun on power circuits or mechanical equipment.”

MSHA standards require that before working on electrical circuits, power must be disconnected, switches locked out and warning notices posted and signed by those performing the work. In addition, power to machinery or equipment must be off and the machinery or equipment blocked against hazardous motion before beginning repairs or maintenance.”

Lock Out Tag Out Try Out

Expect Increased Lock Out Tag Out Try Out Enforcement

“MSHA will stress the importance of concentrating on effective lockout procedures by focusing additional resources on increased enforcement and education and outreach, including walk-and-talks….Metal and Nonmetal inspectors and Educational Field and Small Mines Services personnel will be visiting mines, discussing safe work practices with miners and reminding everyone to maintain their focus on safety.”

Lock Out Tag Out - Don't Get Blindsided By MSHA

Lock Out Tag Out Procedures Must be in Your Standard Operating Procedures.

Lock Out Tag Out Procedures should really be known as Lock Out Tag Out Try Out. No machine is truly tagged out until you have tried to turn it on and nothing happens. MSHA is re-emphasizing their effort to make sure every person on a mine tries out a machine before they consider it safe to conduct work. Lock Out Tag Out Try Out should be an integral part of every company’s standard operating procedures.

What This Means For 2016

As we all know, MSHA is much more inclined to increase enforcement and fines than to educate. I’ve discussed MSHA’s inclination to attribute decreased fatalities with the recent increase in fines.

Review your Lock Out Tag Out Try Out procedures. Do they need updating? Now would be a great time to focus a morning safety meeting or toolbox talk on LOTOTO.

Make sure you emphasize Lock Out Tag Out Try Out in your MSHA training this year.

Stay safe everyone.

 

lock out tage out msha updates and tips

Essential MSHA Resources

Intro To MSHA Crash Course

The MSHA Compliance rules you -need- to know. Fast!

MSHA Tips For Mine Managers

Exclusive help from a former MSHA Inspector